We are currently putting together a product specification sheet that we will give to our customers (mainly scientists and engineers). We would like several (4-5) high-quality 3D rendered images of our product. One image of both the sensor probe and the control box (which are connected via a black cable), one image of the control box (closeup), and then a few images (closeups) of the probe, which is the most important part of the product. I included several sketches of what we have in mind in the files below (apologies for my poor drawing), with approximate relative dimensions.
Ideally the graphics would be as realistic as possible, in front of a white background (and maybe a duplicate copy in front of a black background if this isn't too difficult), and with some shadowing on the ground below the product.
The closeup of the sensor probe will be the most important image of the bunch, and there is a sketch of it in the file attached. The probe consists of a plastic rounded case, a cable coming out the top, and the 'sensor region' which is flat, silver, & reflective with a spiral shaped structure that should glow red to indicate light is going through it. This spiral is the `sensor' component-- I have included an image (not my own image) of what this looks like in real life, but feel free to deviate from this to make it look cool. If possible, it would be great to show some animated molecules next to the spiral shape or surface of the sensor.
**The probe chip-area is about a 1.5cm x 1.0cm rectangle
**The spiral sensor should be a rectangular spiral (like how I sketched out in the attached image). The circle spiral image is to show what it looks like with light going through for inspiration
**The control box has an LCD screen on the left, the sensor cable plugs in on the right. There are about 5 buttons, plus one power button. I am very flexible on the design of the control box. Approximate dimensions: 25cm wide, 10cm tall, 40cm deep (going back).
**Approximate probe dimensions: 2.0cm long x 1.5cm wide x 0.5cm thick. The chip area is 1.5cm long x 1.0cm wide so the plastic case adds ~5mm in each dimension.
**The cable would ideally be cylindrical
**I added one additional image, of a chip with light glowing upwards. It would be cool if the chip had this sort of faded glowing effect, in addition to the rectangular spiral glowing.
**The flat chip (with rectangular spiral) is only slightly recessed (about 1.5mm), and the inner walls (or bezel?) going down to the flat chip are the same material as the outer rounded case.